Our PACG Box Organizer is sure to whip your Henchmen into shape and clean up that disorganized armory! Can't remember where you put that Longsword +1 or your Potion of Healing? You need one of these! This organizer is designed to work with all current Pathfinder Adventure Card Game box.
Our stylish new design features sturdier, straighter card sections and spacing tabs which can be removed with a hobby knife to allow the organizer to fit smaller boxes.
The organizer comes with 16 dividers to separate different card types and a section for dice. There's even extra room for pen, paper and Cheetos®!
This product is a kit that requires assembly. We recommend the use of wood glue (sold separately)
This is a third-party accessory designed by The Broken Token. All product names are trademarks of their respective owners, which are in no way associated or affiliated with The Broken Token.
The best insert for this game!
3/26/2014 9:00:00 pm
Easy to put together. Plenty of space for your growing game with every card sleeved. Adds extra strength to the box as a bonus.
3/17/2014 9:00:00 pm
I bought this so I can sleeve the cards for this game and still fit them into the box.<br><br>I'm not very good at assembling things, and putting this together did require some effort. I had trouble attaching part J, then, after a struggle, realized I had attached it backwards!<br><br>But in the end it all came together. Works like a charm.
3/17/2014 9:00:00 pm
This is a great box organizer for the Pathfinder Card Game. It gives you a massive increase in storage space, and worked fine with my sleeved cards. You should be able to store about everything for quite a while in this organizer.
3/17/2014 9:00:00 pm
I sleeve everything. The box insert was working ok until I got to Adventure 3, and then stopped working all together. <br><br><br><br>I ordered this and will order another just as soon as August comes for the next one. This insert works beyond expectations.
3/27/2014 9:00:00 pm
I am using thicker card protector sleeves on my game due to the amount of use I am getting out of the game. I made a custom foam one, but it didn't give me the customizable dividers on the fly. I ordered this and will be getting another for the new set. Not only does it work for all the cards, it looks really good, visually, as well.
Slightly Modified it, but it works great!
3/24/2014 9:00:00 pm
I picked up one of these to replace my custom foam board insert. I wanted to maximize the card space so I didn't place the dice box barrier the way they instructed and the whole setup was still just as structurally sound as if it was in place. I put my dice in the smaller tray on the right and now I have the full row to place cards on the left.<br><br><br><br>Great product, greatly recommend this.
Great solution for sleeved cards or just for extra storage!
3/15/2014 9:00:00 pm
The plastic insert that comes with PACG is great. But if you sleeve cards for protection or so you can mix in your homemade cards, it won't hold all your cards for long. I at first made a foam board insert, which I liked very much. But when this came out it looked good enough to give it a try.<br><br><br><br>Here is what is great about: <br><br><br><br>1. Other than the character decks and the dice tray, all the other dividers for the rows of cards can be moved to configure it how you want it. The suggested layout works great though for fuller boxes, but when you only have the base set and maybe an expansion deck or two you can shorten up the areas to keep things from tipping over too much.<br><br><br><br>2. Compared to the plastic insert, you gain a skinny row on the right end of the box for storing extras (standees, pens, whatever) and a square in the upper left corner for your dice, which holds 5 complete sets of the 5 polyhedral dice you'll need for PACG.<br><br><br><br>3. Compared to my foam board insert, the curve cut into each divider makes it easy to see the cards behind the divider so you can visually recognize where each type is. That also makes it easier to grab them.<br><br><br><br>4. Cost. To build my foam board insert I spend maybe $12 on foam board and another $7 on materials (glue, pins, surface to cut on, a sharp razor). Plus the couple of hours it took me to measure, cut, glue, wait, glue some more. It is worth the extra cost to save a few hours of time and get a nicer product.<br><br><br><br>5. Plenty of space. With cards through deck 4 (out of 6 total) no section seemed more than 50% full. So I don't anticipate any problems once I have the whole adventure path in there.<br><br><br><br>Set up was easy. It took me maybe 30 minutes, but I was being very careful to read and re-read the directions and gentle with the materials. It could probably be done much quicker.<br><br><br><br>The pieces join either by tabs inserted into slots or by pieces with slots that slide into each other. Definitely glue the "tab" version. I also used a bar clamp to hold the outer walls in place while the glue dried.<br><br><br><br>There are 17 "wide" movable dividers for the 4 rows that will hold cards (7 more than you need) and 3 "narrow" dividers for the row of extra storage.<br><br><br><br>I ended up buying a second one for the next edition of PACG (Skull and Shackles). As long as the new editions are always for 6 characters max, and have generally the same total number of cards, the extra dividers and their movable nature will mean that if there are more types of cards or different ratios of them, this will work for that too.<br><br><br><br>I highly recommend this product to fans of PACG.
Great option for game storage
4/13/2014 9:00:00 pm
Every thing to date fits. Looks like there is plenty of room for the rest.<br><br><br><br>Very happy would recommend!
Worth every penny
3/29/2014 9:00:00 pm
This product arrived at my place in less time than estimated by shipping. The pieces were free of dings/scrapes/breaks and the burrs left after breaking the pieces from the shells were easily removed with an X-acto knife. Assembly was easy and once it's all put together this insert is not only effective, it also looks fantastic!