Hi Capacity Card Case- 3 Row - Engraved - Dominion Logo
The Longer, Harder Wooden Card Case is a harder, and longer card storage solution with adjustable dividers and support for sleeved or unsleeved cards to satisfy your organizing needs. Our new card case comes in two different settings. A two-row and now a three-row for those who need a little something extra. No matter what size you choose, each case allows for easy access and maneuverability of your cards.
This 3-row case is engraved with "The Longer, Harder Wood." All options have The Broken Token logo engraved on the sides. The card rows are contained in a sturdy 1/4" wooden crate with handle cut-outs on the end. Includes 4 adjustable dividers.
NOTE: Unlike our engraved wooden artist case, all engraving are raw laser engravings and are not stained. The color of the engravings is the natural burnt wood color.
This product is a kit that requires assembly. We recommend the use of wood glue, soft mallet and clamps for assembly (each sold separately).
This is an officially licensed organizer compatible with Dominion by Rio Grand Games.
Rio Grande Games, Dominion and their logo are trademark of Rio Grande Games, PO Box 1033, Placitas, NM 87043. www.RioGrandeGames.com
Cards Against Humanity™ is a trademark of Cards Against Humanity LLC.. This is a third-party accessory designed by The Broken Token and is not endorsed by Cards Against Humanity LLC.
- 12.31" (313mm) x 9.43" (240mm) x 4.27" (109mm)
- 3.7 lbs
6 Columns: 5.74" (145mm) x 2.83" (71mm) x 3.8" (96mm)
|Capacities are approximate and based on average card and sleeve thickness. Actual results may vary.|
Overall nice design but smearing from laser cut residue
These boxes were my first introduction to the Broken Token boxes and inserts. Overall, I'm pleased with these boxes which use thick wood for the outsides and space inside for many cards. The wood did not splinters and the cuts were very precise. So precise, they are a snug fit when inserting the dividers into the box which is great because I don't want it sliding out later when I take cards out.
My only issue during the build was trying to keep it clean from the black residue which was left behind from the laser cuts on the thick outside wood. I constantly had smearing issues. I've since put together other box inserts (Codenames, Carcassone, Terraforming Mars) and did not have the same issue.
One recommendation would be to have a way to store the instructions in the top (inside) of the lid and still have the box close completely.
RESPONSE: Benoy, thank you for the feedback and for being a loyal customer. We will look at the lid recommendation.
As for the smearing/residue we have never heard or seen this issue before. If you have a chance we'd love some pictures so we could figure out what might have happened. you can submit the picture via the contact us, submit a ticket button our web-page: https://www.thebrokentoken.com/contact-us